These Quotations and Service Terms ("Service Terms") apply when Wezatech Solutions Technology ("Wezatech", "we", "us", or "our") issues or approves a quotation, proposal, scope of work, bill of quantities, order confirmation, service agreement or similar commercial document for products or services.
These Service Terms should be read together with ourTerms and Conditions,Billing and Payment Policy,Cancellation, Refund and Service Assurance Policy, andPrivacy Policy.
A quotation or other specific written agreement may contain transaction-specific terms. Where those specific written terms expressly address the same subject differently, the specific written terms take priority for that subject. These Service Terms and the other applicable Wezatech policies continue to apply to matters not specifically changed.
An enquiry, inspection, site visit, discussion, preliminary recommendation or request for pricing does not by itself mean that Wezatech has accepted a job, committed stock or resources, agreed to a final scope or entered into a service engagement.
1. Application and Priority of Terms
These Service Terms apply to quotations, proposals, service engagements and related commercial documents issued or approved by Wezatech unless a specific written agreement expressly states otherwise.
The quotation or written agreement may define the particular scope, quantities, products, options, exclusions, assumptions, price, payment schedule, delivery arrangements, service assurance, warranty details and other transaction-specific matters.
If a transaction-specific provision clearly conflicts with these Service Terms on the same subject, the transaction-specific provision applies to that subject. Unrelated provisions of these Service Terms and the other applicable Wezatech policies remain in effect.
Nothing in these Service Terms is intended to exclude or reduce a mandatory right or remedy that cannot lawfully be excluded under applicable law.
2. Quotations, Proposals and Estimates
Wezatech may issue quotations, proposals, estimates, scopes of work, bills of quantities, technical recommendations or similar documents based on the information reasonably available at the time.
A quotation may include products, professional services, labour, configuration, installation, subscriptions, third-party charges, optional items or alternative solutions. Only the items and services expressly included are part of the quoted scope.
An estimate, budget indication, preliminary price or informal discussion is not a fixed quotation unless Wezatech expressly identifies it as such.
Where a quotation contains options or alternatives, the customer is responsible for identifying the option being approved. Wezatech may request written confirmation where the selected option is unclear.
3. Validity, Pricing and Availability
A quotation is valid for the period stated in that quotation. If no validity period is stated, pricing, availability and delivery expectations remain subject to reconfirmation until the quotation is accepted.
Before acceptance, Wezatech may revise pricing or availability where supplier pricing, exchange rates, shipping, duties, taxes, subscriptions, third-party charges, product availability or other material commercial circumstances change.
Product availability is not guaranteed until the relevant order or reservation has been confirmed. References such as "ex-stock", expected delivery times or supplier availability reflect the information available when the quotation was prepared and may change.
Wezatech may correct genuine typographical, calculation, administrative or pricing errors. If a correction materially affects the transaction before acceptance, Wezatech will provide the corrected information for review.
4. Scope, Assumptions and Exclusions
The approved scope is the work, products and services expressly described in the applicable quotation or written agreement, together with any approved written variation.
A quotation may rely on site observations, customer-provided information, drawings, photographs, remote information, accessible systems, available credentials and other assumptions reasonably used when preparing the proposal.
Conditions that were hidden, inaccessible, undocumented, incorrectly represented or not reasonably discoverable when the quotation was prepared may require a change in scope, price, equipment or timing.
Unless expressly included, work outside the quoted scope is excluded. This may include civil, architectural, electrical, MEP, drilling, trunking, cabling, infrastructure, permitting, building-management, provider or other third-party work that is not specifically listed in the quotation.
The customer should review the quoted scope, exclusions, quantities, models, options and bill of quantities before approval and ask for clarification where anything is unclear.
5. Acceptance and Authorization
A quotation may be accepted through a signed approval, email, authorized electronic message, written order confirmation or another approval method recognized by Wezatech for that transaction.
Where the quotation states that an advance payment or deposit is required before procurement or scheduling, payment of that amount may form part of the acceptance process together with any required written approval.
A person approving a quotation on behalf of a company, organization, institution, household, property owner or another person confirms that they have appropriate authority to provide that approval.
Wezatech may request confirmation of authority, scope, quantities, technical choices or payment arrangements before proceeding where approval is incomplete, ambiguous or inconsistent with the quotation.
6. Deposits, Procurement and Ordered Products
Deposits, advance payments and payment milestones are transaction-specific and will be stated in the quotation, invoice or other applicable written agreement.
Wezatech may use an approved advance payment to order products, reserve supplier stock, secure licences, allocate resources or begin approved work.
Once Wezatech has placed an order, reserved stock, activated a licence, committed a supplier charge or begun custom or approved work, some amounts may become committed and may not be recoverable from the relevant supplier or service provider.
Where a quotation states that specific ordered, configured, licensed, custom or special-order items are non-cancellable or subject to supplier restrictions, that transaction-specific condition applies subject to applicable mandatory rights.
Further payment rules are set out in our Billing and Payment Policy.
7. Changes, Variations and Additional Work
A change to the approved scope, quantity, product, configuration, location, design, schedule, access method or other material requirement may require a variation to the quotation.
Additional work identified during diagnostics, installation, commissioning or service delivery will not automatically become part of the original scope.
Where practical, Wezatech will explain the additional requirement and obtain approval for any material additional charge before proceeding with that additional work.
A material change to scope, price, payment, warranty, service assurance or completion expectations should be confirmed through an authorized written Wezatech communication. Ordinary technical guidance or routine service updates do not by themselves alter the commercial agreement.
Wezatech personnel do not have unlimited authority to waive charges, grant discounts, extend warranties or make exceptional commercial commitments unless the change is authorized by Wezatech.
8. Customer Responsibilities and Access
The customer is responsible for providing accurate information reasonably needed to prepare and perform the quoted work and for informing Wezatech of known conditions that may affect the service.
The customer must have lawful ownership, authorization or other appropriate authority over the equipment, property, accounts, networks, systems, services and data that Wezatech is asked to access or modify.
Where relevant, the customer is responsible for providing safe and timely access to the site, equipment, network rooms, cabinets, devices, systems, accounts and other areas required for the approved work.
The customer is also responsible for arranging building access, permits, third-party approvals, provider coordination or other external permissions unless the quotation expressly assigns that responsibility to Wezatech.
Wezatech may pause or refuse work where access, authority, safety or required approvals are unavailable or unclear.
9. Site Readiness, Scheduling and Delays
Scheduling may depend on receipt of the required payment, product availability, customer approval, site readiness, administrative access, maintenance windows and availability of Wezatech personnel.
Unless expressly guaranteed in writing, delivery and completion times are reasonable estimates based on the information available at the time.
Delays may result from supplier availability, shipping, provider restrictions, unavailable credentials, inaccessible systems, site conditions, power or internet issues, building-management requirements, customer changes, third-party work or other circumstances reasonably outside Wezatech's control.
If a visit cannot proceed because agreed access, readiness, approvals or required information were not available, the work may need to be rescheduled. Any additional visit, remobilization or related charge will be handled according to the quotation or separately approved written terms.
10. Equipment, Data, Backups and Credentials
Where practical, customers should maintain a current backup of important data before repair, configuration, operating-system work, storage work, migration or other technical activity that could affect existing data.
If backup, migration or data recovery is itself part of the approved service, the achievable result depends on the condition of the source media, device, system, account or service. Complete recovery or preservation of all data cannot be guaranteed unless expressly stated in writing.
The customer should provide only the credentials and access reasonably required for the approved task. Wezatech may request temporary access or a customer-authorized administrator account where appropriate.
Customers should change temporary passwords or credentials after completion where practical. Wezatech may refuse unnecessary or excessive access that is not relevant to the approved work.
Personal information handled during the service remains subject to ourPrivacy Policy and applicable law.
11. Third-Party Products, Licences and Services
Wezatech may supply, source, configure, install, recommend or support products and services provided by third parties, including hardware, software, licences, subscriptions, cloud services, internet services and logistics.
Third-party products and services remain subject to their manufacturers', developers', suppliers' or service providers' own specifications, licences, warranties, support rules, subscriptions, availability and terms.
Wezatech does not control third-party networks, internet service providers, cloud platforms, manufacturers, software developers, suppliers, payment providers or logistics providers.
Where a proposed product becomes unavailable, discontinued or materially delayed, Wezatech may recommend an alternative. A materially different substitute will not be treated as approved without appropriate customer confirmation.
Ongoing third-party licence, subscription, cloud, provider or renewal charges are excluded unless expressly included in the quotation.
12. Delivery, Installation, Handover and Completion
Delivery, installation, configuration, commissioning, handover and completion requirements depend on the scope stated in the applicable quotation.
A product-only transaction may be complete upon delivery or collection. A service transaction may require installation, testing, configuration, documentation, handover or another completion step stated in the quotation.
Where installation or commissioning depends on customer-supplied cabling, equipment, internet service, credentials, software, infrastructure or third-party work, Wezatech may complete only the portions that can reasonably be performed with the available conditions.
Completion of the approved scope does not include later expansion, redesign, maintenance, additional site visits, new user requirements or other work outside the approved quotation unless separately agreed.
13. Testing, Acceptance and Defects
Where applicable, Wezatech will perform reasonable testing or commissioning appropriate to the approved service and the conditions available at the time.
The customer may be asked to provide an authorized representative for configuration decisions, testing, handover or acceptance where the service requires customer confirmation.
A request for additional features, relocation, redesign, changed configuration or work outside the approved scope is not by itself a defect in the completed service and may require a separate quotation.
Customers should report concerns relating to the supplied product or completed service as soon as reasonably practical and provide enough information for Wezatech to assess the issue. General service concerns may be directed to [email protected] or another authorized service channel.
Handover or acceptance does not remove any mandatory consumer right, manufacturer warranty or other right that cannot lawfully be excluded.
14. Service Assurance and Manufacturer Warranties
Any service assurance, post-completion support period or included support scope will be stated in the quotation, service document or other applicable written terms.
Unless expressly included, service assurance does not create an ongoing maintenance agreement and does not include new requirements, additional site visits, unrelated faults, customer or third-party changes, or work outside the approved scope.
Hardware, software or other third-party products may carry a manufacturer or supplier warranty. The applicable warranty duration, coverage and claim process depend on the relevant product and supplier terms.
Customer-supplied equipment is not covered by a Wezatech-supplied product warranty. Damage, faults or performance limitations caused by misuse, unauthorized modification, unsuitable environmental conditions, third-party changes or matters outside the warranty terms may also fall outside warranty coverage.
Cancellation, refund, defect and service assurance matters are further addressed in ourCancellation, Refund and Service Assurance Policy.
15. Confidentiality, Proposals and Proprietary Materials
Quotations, proposals, scopes of work, bills of quantities, technical recommendations, designs, diagrams, assessments, reports, pricing structures, solution concepts and similar Wezatech materials may contain proprietary, confidential or commercially valuable information.
Unless Wezatech agrees otherwise in writing, material prepared for a particular recipient is provided for that recipient's evaluation of the proposed Wezatech transaction.
Such material must not be copied, published, distributed or disclosed externally for the purpose of obtaining competing pricing, conducting third-party procurement, reproducing Wezatech's proposed solution, or enabling another provider to implement substantially the same Wezatech-designed solution without prior written authorization from Wezatech.
The recipient may share the material internally with employees, management, professional advisers or authorized decision-makers who reasonably need it to evaluate the proposal, provided that it is treated appropriately and is not used for an unrelated commercial purpose.
This section does not give Wezatech ownership of information originally supplied by the customer and does not prevent another party from independently developing its own solution without improperly using Wezatech's protected material.
16. Cancellation, Suspension and Payment
Payment methods, deposits, advance payments, instalments and settlement dates are governed by the applicable quotation, invoice or written agreement together with ourBilling and Payment Policy. Customer-facing billing and payment enquiries may be directed to [email protected].
If a customer asks to cancel after Wezatech has performed work, committed supplier costs, ordered products, reserved stock, activated licences or incurred other approved transaction costs, the consequences will depend on the applicable written terms, supplier restrictions and mandatory law. Formal cancellation or refund requests should be submitted in writing to [email protected], unless another authorized written channel has been provided for the transaction.
Wezatech may suspend procurement, scheduling or service delivery where required payment or approval is overdue, required access is unavailable, the requested activity appears unlawful or unsafe, or continuing the work would create an unreasonable security, safety, technical or commercial risk.
Resuming suspended work may depend on payment, renewed approval, availability, access or rescheduling. Any additional charge must be supported by the applicable quotation or separately approved written terms.
Further cancellation and refund rules are set out in ourCancellation, Refund and Service Assurance Policy.
17. Risk, Liability and Mandatory Rights
Technical outcomes can depend on existing equipment, customer-supplied infrastructure, building conditions, interference, data condition, software, licences, providers, suppliers and other circumstances that Wezatech does not fully control.
Where a quotation identifies assumptions, limitations, exclusions or best-effort outcomes, those conditions form part of the commercial basis on which that particular work is undertaken.
Wezatech is not responsible for failures, delays or losses caused solely by customer-supplied information, defective customer equipment, unauthorized third-party changes, unavailable access, provider failures or other circumstances for which Wezatech is not reasonably responsible.
The limitation-of-liability provisions in our Terms and Conditions also apply to service engagements to the maximum extent permitted by law.
Nothing in these Service Terms excludes liability that cannot lawfully be excluded or limits any mandatory consumer protection available under applicable law. These Service Terms are governed by the laws of the State of Qatar, subject to any valid transaction-specific dispute-resolution arrangement permitted by law.
18. Business Identity and Contact
These Service Terms are issued by:
Wezatech Solutions Technology
Commercial Registration: 206718
State of Qatar
- Customer Care
- [email protected]
- Billing
- [email protected]
- Refund Requests
- [email protected]
- Phone / WhatsApp
- +974 6674 7442
- Website
- wezatech.com
Current office and contact details are available on the Contact Us page.
