This Cancellation, Refund and Service Assurance Policy ("Policy") explains the general framework used by Wezatech Solutions Technology ("Wezatech", "we", "us", or "our") when a customer requests cancellation, reports an issue, seeks a refund, or asks for support after a product or service has been supplied.
This Policy should be read together with our Terms and Conditions,Quotations and Service Terms,Billing and Payment Policy, andPrivacy Policy.
A quotation, proposal, invoice, order confirmation, service agreement or other authorized written Wezatech document may contain transaction-specific cancellation, refund, warranty or service-assurance terms. Where those specific written terms expressly address the same subject differently, the specific terms take priority for that transaction.
Nothing in this Policy is intended to exclude or reduce any mandatory consumer right or remedy that cannot lawfully be excluded under applicable law.
1. Scope and Priority of This Policy
This Policy applies to Wezatech products, professional services, technical assessments, repair and support work, installations, projects, subscriptions, maintenance arrangements and other approved customer transactions.
The applicable quotation or written agreement may define specific cancellation conditions, non-refundable committed costs, service-assurance periods, manufacturer warranty details, exclusions or other transaction-specific requirements.
Where a transaction-specific written term clearly addresses the same subject differently, that specific term applies to that subject. The remainder of this Policy continues to apply.
2. Cancellation Before Work Begins
A customer may ask to cancel before Wezatech has begun work or committed costs. The consequences will depend on whether any products, licences, supplier charges, delivery arrangements, reserved stock, scheduled resources or other approved costs have already been committed.
If no non-recoverable cost has been incurred and no work has begun, Wezatech will normally review the amount paid for refund or credit, subject to the applicable written terms and any reasonable administrative or provider charges already incurred.
A formal cancellation or refund request should be submitted in writing torefund@wezatech.com, unless Wezatech has provided another authorized written channel for the relevant transaction. The request should include enough information to identify the customer, transaction and requested action so that its timing and scope can be confirmed.
If a cancellation or refund request is received through another identifiable Wezatech channel, Wezatech may route it internally rather than treating the request as invalid solely because a different Wezatech address was used.
3. Cancellation After Work or Procurement Starts
If a customer requests cancellation after Wezatech has started approved work, placed orders, reserved stock, activated licences, scheduled resources or incurred other approved costs, the customer may remain responsible for the value of work performed and costs already committed.
Wezatech will assess what portion, if any, remains recoverable after considering completed work, committed costs, supplier restrictions, payment-provider charges and the applicable written agreement.
Cancellation does not automatically reverse work already completed or obligations already properly incurred.
4. Ordered, Special-Order and Activated Products
Products ordered specifically for a customer, special-order items, configured equipment, activated licences, registered subscriptions, customized items or products subject to supplier cancellation restrictions may not be fully cancellable once the relevant supplier commitment has been made.
The applicable quotation may identify ordered or custom items as non-cancellable, non-returnable or subject to supplier approval. Such conditions apply subject to mandatory rights that cannot lawfully be excluded.
If a supplier accepts a cancellation or return but imposes restocking, shipping, licence, processing or other charges, those charges may affect the amount available for refund or credit.
5. Completed Services and Change-of-Mind Requests
Once an approved service has been properly completed, a change of mind or later decision not to use the completed work does not by itself create a right to refund the service charge.
A request for new features, different configuration, relocation, redesign, additional work or a changed customer preference is not by itself evidence that the original service was defective.
If the customer believes the completed service is defective, incomplete or inconsistent with the approved scope, the issue will be assessed under the defect and service-assurance provisions of this Policy.
6. Refund Eligibility
A refund may be considered where appropriate, including where Wezatech is unable to supply an approved item or service, an approved cancellation leaves recoverable funds, an overpayment occurred, or a defect or non-conformity gives rise to an applicable refund remedy.
Refund eligibility depends on the facts of the transaction, the approved scope, payment status, work completed, supplier commitments, product condition, applicable warranty or service-assurance terms and mandatory consumer rights.
Wezatech may offer correction, re-performance, replacement, credit or another reasonable remedy where that is appropriate to the issue and permitted by applicable law.
7. Refund Method, Timing and Processing
Where a refund is approved, Wezatech may return the amount through the original payment method or another reasonable method appropriate to the transaction.
Wezatech will process an approved refund within a reasonable administrative period after the amount and refund method have been confirmed. Refund-related information requested during that process should be provided throughrefund@wezatech.com or another authorized written channel identified by Wezatech.
The time required for funds to appear after Wezatech has issued the refund may depend on the bank, card network, payment provider or other third party involved.
Wezatech does not promise a fixed external banking or payment-provider settlement time that is outside its reasonable control.
8. Assessment and Inspection of Reported Issues
Wezatech may need to inspect, test, review logs, reproduce the reported issue or otherwise assess the product or service before determining the appropriate remedy.
The customer should provide reasonable information about the reported issue and, where necessary, make the relevant equipment, system, site or account available for assessment. A general service concern or service-assurance issue may be raised with Customer Care athello@wezatech.com without first making a refund request.
If the reported issue cannot be reproduced, results from prior testing, screenshots, error messages, dates, environmental conditions or other relevant evidence may help Wezatech assess the matter.
An assessment may determine that the issue is unrelated to the original Wezatech work or was caused by a later customer, third-party, environmental, provider or equipment change.
9. Defects, Non-Conforming Products and Service Issues
If a supplied product or completed service is reasonably shown to be defective, materially incomplete or inconsistent with the approved specification, Wezatech will assess the appropriate remedy based on the nature of the issue, the applicable written terms and mandatory consumer rights.
Depending on the circumstances, a remedy may include correction, re-performance, repair, replacement, supplier warranty handling, credit, refund or another legally appropriate outcome.
The customer should report a suspected defect or non-conformity as soon as reasonably practical throughhello@wezatech.com or another authorized service channel so that the condition can be assessed before unrelated changes make diagnosis more difficult.
Reporting an issue does not automatically establish that the issue was caused by Wezatech. The cause and applicable remedy may require reasonable technical assessment.
10. Service Assurance
Wezatech may provide a defined service-assurance or post-completion support period for particular services.
The applicable quotation, service document or written agreement controls the service-assurance duration and included support for that transaction.
Where Wezatech expressly provides a seven-day post-setup remote support period, that period is intended to cover reasonable remote assistance relating to the completed setup during the stated period. It does not create an unlimited maintenance or support agreement.
If no service-assurance period is stated for a particular transaction, this Policy does not create an automatic fixed-duration support commitment beyond rights that apply under the approved scope, warranty terms or mandatory law.
11. What Service Assurance Covers
Where applicable, service assurance is intended to address reasonable follow-up relating directly to the work Wezatech completed, such as clarification, minor correction or troubleshooting of an issue that is attributable to the approved service.
Service assurance may be provided remotely where the issue can reasonably be handled without an onsite visit. An onsite visit is included only where the applicable quotation or service terms say so, or where Wezatech otherwise agrees to provide one without additional charge.
Service assurance does not extend the original approved scope. Work that was not included in the original transaction may require a separate quotation.
12. What Service Assurance Does Not Cover
Unless expressly included, service assurance does not cover:
- new requirements, added features, expansion, redesign or relocation;
- unrelated faults or problems outside the approved scope;
- damage, failure or changes caused by the customer or another service provider;
- manufacturer defects or third-party product failures that require supplier warranty handling;
- internet, cloud, provider, software, licence or third-party service outages outside Wezatech's control;
- physical damage, misuse, liquid damage, electrical events, environmental conditions or unauthorized modification;
- problems caused by customer-supplied infrastructure, equipment, cabling, software or credentials; or
- onsite visits, replacement products or new labour unless specifically included.
13. Manufacturer and Supplier Warranties
Products supplied by Wezatech may carry a manufacturer or supplier warranty. Warranty duration, coverage, exclusions, replacement rules and claim procedures depend on the relevant product and supplier.
A manufacturer warranty is separate from Wezatech service assurance. Wezatech may assist with a supplier or manufacturer claim where appropriate, but the final warranty decision may be controlled by that third party.
Replacement or repair under a manufacturer warranty may require inspection, serial-number verification, proof of purchase, return of the defective item or another supplier requirement.
A manufacturer warranty does not normally cover damage or conditions excluded by the manufacturer's own terms.
14. Customer-Supplied Equipment and Third-Party Changes
Customer-supplied equipment is not covered by a Wezatech-supplied product warranty merely because Wezatech installed, configured, repaired or worked with that equipment.
Where a customer or third party changes, removes, resets, updates, relocates, damages or reconfigures equipment, software, accounts or infrastructure after completion, any resulting issue may fall outside the original service assurance.
Wezatech may still assist with such an issue, but additional work may require a new assessment, quotation or service charge.
15. Data, Recovery and Irreversible Technical Work
Some technical services involve data, failing storage, damaged devices, operating-system changes, migrations, recovery attempts, resets or other work where outcomes cannot be guaranteed in advance.
Data recovery is generally a best-effort service whose result depends on the condition of the source media, device or system. A partial recovery, unreadable files or an inability to recover data does not automatically mean the service was improperly performed.
Where practical, customers should maintain current backups before technical work that could affect existing data. If backup or recovery is itself the approved service, Wezatech will use reasonable care but cannot guarantee recovery of every file unless a specific written guarantee was expressly provided.
Certain approved actions may be irreversible or may change the state of a device, account, configuration or dataset. Wezatech may request confirmation before performing a material irreversible action.
16. Mandatory Consumer Rights
This Policy operates subject to mandatory consumer protection and other rights available under the laws of the State of Qatar.
Nothing in this Policy is intended to remove a right relating to defective or non-conforming products or services where that right cannot lawfully be excluded or restricted.
Where applicable law requires a remedy different from or broader than the remedy described in this Policy, the legally required remedy will apply.
17. Changes to This Policy
Wezatech may update this Policy to reflect changes in products, services, supplier arrangements, payment processes, warranty handling, service-assurance practices, operations or legal requirements.
The current version will be published on the website with its Last Updated date. The Effective Date identifies when this cancellation, refund and service-assurance policy framework began applying.
A future update will not retrospectively alter a completed transaction where doing so would be inconsistent with the applicable written agreement or applicable law.
18. Business Identity and Contact
This Policy is issued by:
Wezatech Solutions Technology
Commercial Registration: 206718
State of Qatar
- Refund Requests
- refund@wezatech.com
- Service Concerns
- hello@wezatech.com
- Phone / WhatsApp
- +974 6674 7442
- Website
- wezatech.com
Current office and contact details are available on the Contact Us page.
